Breaking the industrial bottleneck: MEMS 6-axis force sensors for robot wrists are now being delivered in large quantities, and 6-axis force is really starting to go mainstream
Most domestic six-axis force sensors use metal strain gauge solutions. Limited by manual assembly and bonding processes, it has long been difficult to achieve high-end domestic replacement and true large-scale production, making them expensive and hard to popularize. Relying on MEMS silicon strain gauges and glass micro-fusing technology, Jingyi Micro-sensing Company’s series of MEMS six-axis force sensors for robot wrists have begun mass delivery, breaking through industrialization bottlenecks, with a self-built fully automated production line capable of producing 1 million units per year. The launched F6-050 series and F6-075 series cover the full demand for compact precision force control across industrial, home, medical, and research scenarios.
Figure 01 | Robotic wrist MEMS six-dimensional force, six forces (torques) output
01 Common Core Technology Foundation – Multiple Series Launched to Meet Needs in Different Fields
All series of products share the same set of core technologies: MEMS silicon strain gauge and glass micro-fusing, divided into three types according to overall accuracy.
Sensing layer: MEMS silicon strain gauge, with sensitivity 100 times that of traditional metal foil strain gauges, area can be less than 0.3mm².
Manufacturing layer: Glass micro-fusing process, high-temperature sintering, glue-free connection, fundamentally solving zero-point drift caused by adhesive aging and creep.
Structural layer: High-strength stainless steel body, high rigidity, strong overload resistance, overload level reaches 300%.
Compensation layer: High and low temperature compensation, stable characteristics within an operating temperature range of -10 to 80℃.
Specs for the Pro, Standard, and Basic versions
02 F6-050 Series: More Compact, Lighter

Figure 03 | F6-050 Sensor and Mechanical Connector Assembly Diagram
To meet the compact six-dimensional force requirements of humanoid robot wrists, the F6-050 is the ideal solution: a compact body of ⌀50×25mm, weight ≤0.2kg, force range: 100~500N, while simultaneously measuring forces in the Fx, Fy, Fz directions and torques in the Mx, My, Mz directions. The performance parameters are shown in the table below.
Note: A hollow version is also available
Communication interface: RS485/CANFD, default high baud rate of 921600, automatically uploads detection data periodically, built-in ModBus CRC16 check, open protocol, and easy to use.
Actuator Installation Interface
Actuator mounting surface: 4-M5 threaded holes, 2-Ø5 pin holes
Base mounting surface: 6-M3 threaded holes, 2-Ø3 pin holes
Outer diameter: Ø50 mm
Figure 04|F6-050 Installation Dimension Engineering Drawing (Actuator Mounting Surface / Side View / Base Mounting Surface)
03 F6-075 Series: Standard Sizes, Best for Collaborative Robot End Effectors
Facing the universal requirements of collaborative/industrial robots, the F6-075 is compatible with mainstream robotic arm standard interfaces, supporting plug-and-play.
Note: A hollow version is also available
Communication interfaces: RS485/ModBus, CANFD, EtherCat, etc., with open protocols and easy to get started.
Actuator Installation Interface
Base mounting surface: 8-M4 threaded holes 2-Ø5 pin holes
Outer diameter: Ø75 mm
04 From installation to getting started, worry-free all the way
● Installation in six steps: align the locating pin → attach the flange upper arm → fix with M5 screws → align the pin holes → place the sensor → tighten with 6 M3 screws
● Wide voltage supply: 9~36V DC
● Standard delivery: sensor body, transmission cables, debugging manual, PC software, etc.
05 Written at the End
From chip design to full-device calibration, from single prototypes to mass production at the million-unit level, Jingyi Micro Sensors has turned the ‘high precision’ of MEMS into a scalable, deliverable capability: every product is fully inspected and calibrated before shipment, comes with a 12-month warranty, and we respond to on-site or remote support requests within 24 hours. This makes robots truly ‘feel accurate,’ helps six-axis force sensors become widely used, and ensures worry-free large-scale deployment.













